RG-APF2260(MG)

Ceiling access point

PRODUCT VIEW

Select the image for a closer look.

AX3000 e-Lighten Multi-Service Ceiling Mount AP

Wi-Fi standard: Wi-Fi 6. Source specification: Wi-Fi standard: Wi-Fi 4, Wi-Fi 5, Wi-Fi 6
Number of default WAN ports: 1
Number of 1000BASE-T PoE ports (PoE In): 1

Price, availability and lead time confirmed in your quotation.

View your quote list ↗Ask about this model ↗

Product overview

AX3000 e-Lighten Multi-Service Ceiling Mount AP

Official product information: https://reyee.ruijie.com/en-global/products/e-lighten/e-lighten-ap/ceiling-ap/rg-apf2260mg/

Technical specifications

Product details

Product Type	Ceiling AP
Highest QAM order	1024
eFEM	Yes
Cooling	Natural cooling
Altitude	Operating altitude: 0 m to 5,000 m (0 ft. to +16,404.20 ft.) Storage altitude: –500 m to +5,000 m (–1,640.42 ft. to +16,404.20 ft.)
MTBF	400,000 hours
EMC	EN 55032 EN 55035 EN 301489-1 EN 301489-3 EN 301489-17 EN 61000-3-3 EN IEC 61000-3-2
Flash memory	128 MB
RAM	512 MB DDR3
Maximum number of SSIDs	8
AP Mesh	Yes
Maximum number of APs supported by AP Mesh networking	16
Maximum number of AP groups	8
Maximum number of devices that can be managed	300
Forcibly disconnecting clients with low-weak signals	Yes
AP load balancing	Yes
OFDMA	Yes
WMM	Yes
Beamforming	Yes
Fast transition (802.11r)	Yes
Global blocklist and allowlist	Yes
Number of global blocklists/allowlists	256
Number of global blocklists and allowlists based on OUIs	256
WQoS	Yes
Different SSIDs for different VLANs	Yes
Different SSIDs for different APs	Yes
User isolation	Yes
WLAN client disconnection log	Yes
Access RSSI threshold	Yes
Maximum number of APs that can be optimized	50
AP group	Yes
SNMPv1, v2c, and v3	Yes
Network self-check	Yes
Client logs	Yes
Syslog	Yes
Log storage	Yes
TFTP client (IPv4 address)	Yes
FTP client (IPv4 address)	Yes
NTP client	Yes
Restarting devices through Ruijie Reyee App	Yes
Network-wide scheduled restart	Yes
HTTP login	Yes
HTTPS login	Yes
SNTP	Yes
Fault diagnosis	Yes
IPTV	No
Screen mirroring	No
IPv6	Yes
IPv6 ping	Yes
IPv6 traceroute	Yes
Maximum number of ARP entries	1024
DNS client	Yes
Static/Dynamic NAT	Yes
Static/Dynamic NAPT	Yes
ARP binding	Yes
IPv4 ping	Yes
DHCP server	Yes
DHCP client	Yes
AP mode	Yes
eWeb login with the username and password	Yes
Log upload	Yes
Internet access mode	Static IP address Static IPv6 address Dynamic IP address Dynamic IPv6 address PPPoE
Local upgrade	Yes
Online upgrade	Yes
Configuration backup	Yes
Restoring factory defaults	Yes
Connected AP portal server	Ruijie Cloud
WPA-Enterprise WPA2-Enterprise WPA/WPA2-Enterprise	Yes
Smart DNS proxy	Yes
Avoiding IP address conflicts on WAN interfaces	Yes
Device	1
Screw	2 x Cross pan head screw (ST4.2 x 25 mm) 2 x Plastic expansion anchor (φ6.3 x 25 mm)
User Manual	1

Interfaces & performance

Ethernet cable type	CAT5 CAT5e CAT6 CAT6a CAT7 CAT7a
Total number of optical ports	1
Number of default WAN ports	1
Number of default LAN/WAN ports	1
Number of default LAN ports	1
External network speed test	800
Forwarding mode	Yes

Wireless & radio

2.4 GHz Wi-Fi	Wi-Fi 4 (IEEE 802.11b/g/n) Wi-Fi 6 (IEEE 802.11ax)
5 GHz Wi-Fi	Wi-Fi 4 (IEEE 802.11a/n) Wi-Fi 5 (IEEE 802.11ac) Wi-Fi 6 (IEEE 802.11ax)
Radio design	Dual-radio 4 spatial streams and 5 radio streams ● 2.4 GHz: 2 x 2, MIMO ● 5 GHz: 2 x 2, MIMO
Coverage range	145 ㎡ (1560.77 square ft.) Note: The data is obtained in an ideal environment without obstruction. The signal coverage radius depends on client performance and environmental interference.
2.4 GHz wireless data rate	574 Mbps
5 GHz wireless data rate	2402 Mbps
6 GHz wireless data rate	No
2.4 GHz channel width	Auto/20/40 MHz
5 GHz channel width	Auto/20/40/80/160 MHz
Receive sensitivity	11b: –91 dBm (1 Mbps), –90 dBm (5.5 Mbps), –87 dBm (11 Mbps) 11a/g: –89 dBm (6 Mbps), –82 dBm (24 Mbps), –78 dBm (36 Mbps), –72 dBm (54 Mbps) 11n: –85 dBm (MCS0), –67 dBm (MCS7), –62 dBm (MCS8) 11ac: 20 MHz: –85 dBm (MCS0), –62 dBm (MCS8) 11ac: 40 MHz: –82 dBm (MCS0), –59 dBm (MCS8) 11ac: 80 MHz: –79 dBm (MCS0), ––53 dBm (MCS9) 11ac: 160 MHz: –76 dBm (MCS0), –50 dBm (MCS9) 11ax: 20 MHz: –85 dBm (MCS0), –62 dBm (MCS8), –58 dBm (MCS11) 11ax: 40 MHz: –82 dBm (MCS0), –59 dBm (MCS8), –54 dBm (MCS11) 11ax: 80 MHz: –79 dBm (MCS0), –53 dBm (MCS9), –52 dBm (MCS11) 11ax: 160 MHz: –76 dBm (MCS0), –49 dBm (MCS11)
Bluetooth	No
Antenna	2.4 GHz: 2 built-in omnidirectional antennas 5 GHz: 3 built-in omnidirectional antennas
Antenna gain (2.4 GHz)	2.91 dBi
Antenna gain (5 GHz)	4.00 dBi
Recommended number of associated wireless clients	● Support for IEEE 802.11ax and 160 MHz: 16 (2.4 GHz) 94 (5 GHz) 110 (2.4 GHz and 5 GHz enabled) ● Support for IEEE 802.11ax and 80 MHz: 16 (2.4 GHz) 84 (5 GHz) 100 (2.4 GHz and 5 GHz enabled) ● Support for IEEE 802.11ac: 16 (2.4 GHz) 64 (5 GHz) 80 (2.4 GHz and 5 GHz enabled)
Wireless Intelligent Optimization (WIO)	Yes
Layer 2 roaming	Yes
Layer 3 roaming	Yes
AI roaming	Yes
802.11k/v roaming	Yes
Number of blocklists and allowlists based on MAC addresses (single SSID)	256
Roaming sensitivity	Yes
Radio logs	Yes
Wi-Fi standard	Wi-Fi 4, Wi-Fi 5, Wi-Fi 6

Management & security

Safety compliance	IEC 62368-1
Certification	CE, CB
AP management	Yes
802.1X authentication	Yes
AP portal authentication	Yes
Link authentication	Yes
eWeb management	Yes
Ruijie Reyee App management	Yes
Ruijie Cloud management	Yes
Routing mode	Yes
IPv4 Ruijie SMP/ESS authentication	Yes
Password authentication	Yes
SMS-based authentication	Yes
AAA authentication	Yes
IEEE 802.1Q VLAN	Yes
Warranty Card	1

Power & environment

Maximum transmit power (2.4 GHz)	Combined power: 28 dBm (single-stream power: 25 dBm) Note: The transmit power varies according to regulations in different countries and regions.
Maximum transmit power (5 GHz)	Combined power: 28 dBm (single-stream power: 25 dBm) Note: The transmit power varies according to regulations in different countries and regions.
Maximum transmit power (6 GHz)	No
Power supply	● DC power adapter ● PoE/PoE+ ● PoF Note: No power option is preferred over the others.
Maximum power consumption	18 W
Power supply to external devices	No
PoE power pins	For APs, auto-negotiation is supported. That is, an AP can be powered either over power cable pairs 1-2 and 3-6 or pairs 4-5 and 7-8.
IP rating	IP41
Operating temperature	0°C to 40°C (32°F to 104°F)
Storage temperature	–40°C to +70°C (–40°F to +158°F)
Operating humidity	5% RH to 95% RH (non-condensing)
Storage humidity	5% RH to 95% RH (non-condensing)
Surge protection	Ethernet port: ±2 kV for common mode
Number of 1000BASE-T PoE ports (PoE In)	1
Power settings	Yes
Automatic adjustment of the channel, transmit power, and channel width	Yes
Power cord	No
PoE injector	No
Power adapter	No

Physical & mounting

Product dimensions (diameter x height)	Ø230 mm x 35 mm (Ø9.06 in. x 1.38 in.) (spherical device, excluding the mounting bracket)
Weight	0.36 kg (0.79 lbs) (without packaging materials)
Dimensions of the DC connector	Outer diameter: 5.5 mm (0.22 in.) Inner diameter: 2.1 mm (0.08 in.) Depth: 10 mm (0.39 in.)
Mounting options	Ceiling/Wall
Mounting bracket	1 (82 mm x 88 mm x 6.5 mm, or 3.23 in. x 3.46 in. x 0.26 in.)
Rack-mount bracket	No

Product features

Multi-Service
Ceiling Mount
Wi-Fi 6
AX3000

View manufacturer product information ↗

Plan the equipment around your site.

Equipment can be requested on its own or with installation and configuration. The quotation sets out the agreed work, equipment, exclusions and handover.

Useful details for your enquiry

Site location, intended use and approximate quantities.
Existing equipment, connection standards and power arrangements.
Cable routes, mounting positions, access and preferred timing.

Model compatibility, licences, accessories and the installation scope are checked before confirmation.

Discuss this model and installation

KEEP EXPLORING

More models in this category.

Explore the specifications of other models in the same category to find the right fit for your project.

Build the wider system.

Explore equipment categories for your project. Standards, power and mounting requirements still need to be checked for the installation.

Find your equipment.