Product overview
Wall-mounted, WIFI5
Official product information: https://reyee.ruijie.com/en-global/products/e-lighten/e-lighten-ap/wall-mount-ap/rg-apf1250/
Browse by department
RG-APF1250
Wall AP
PRODUCT VIEW
Select the image for a closer look.
Wall-mounted, WIFI5
- Wi-Fi standard
- Wi-Fi 5. Source specification: Wi-Fi standard: Wi-Fi 4, Wi-Fi 5
- Number of default WAN ports
- 1
- PoE power pins
- No
Price, availability and lead time confirmed in your quotation.
Technical specifications
Product details
| Product Type | Wall AP |
|---|---|
| Highest QAM order | 256 |
| IPTV Transparent Transmission | Yes |
| eFEM | No |
| Cooling | Natural cooling |
| Altitude | Operating altitude: 0 m to 5,000 m (0 ft. to +16,404.20 ft.) |
| MTBF | 250,000 hours |
| EMC | EN 55032 |
| Flash memory | 32 MB |
| RAM | 256 MB DDR3 |
| Maximum number of SSIDs | 8 |
| AP Mesh | Yes |
| Maximum number of APs supported by AP Mesh networking | 16 |
| Maximum number of AP groups | 8 |
| Maximum number of devices that can be managed | 150 |
| Forcibly disconnecting clients with low-weak signals | Yes |
| AP load balancing | No |
| OFDMA | No |
| WMM | Yes |
| Beamforming | Yes |
| Fast transition (802.11r) | No |
| Global blocklist and allowlist | Yes |
| Number of global blocklists/allowlists | 256 |
| Number of global blocklists and allowlists based on OUIs | No |
| WQoS | No |
| Different SSIDs for different VLANs | Yes |
| Different SSIDs for different APs | Yes |
| User isolation | Yes |
| WLAN client disconnection log | Yes |
| Access RSSI threshold | Yes |
| Maximum number of APs that can be optimized | No |
| AP group | Yes |
| SNMPv1, v2c, and v3 | No |
| Network self-check | Yes |
| Client logs | Yes |
| Syslog | Yes |
| Log storage | Yes |
| TFTP client (IPv4 address) | Yes |
| FTP client (IPv4 address) | Yes |
| NTP client | Yes |
| Restarting devices through Ruijie Reyee App | Yes |
| Network-wide scheduled restart | Yes |
| HTTP login | Yes |
| HTTPS login | Yes |
| SNTP | Yes |
| Fault diagnosis | Yes |
| IPTV | Yes |
| Screen mirroring | Yes |
| IPv6 | No |
| IPv6 ping | No |
| IPv6 traceroute | No |
| Maximum number of ARP entries | 512 |
| DNS client | Yes |
| Static/Dynamic NAT | Yes |
| Static/Dynamic NAPT | Yes |
| ARP binding | Yes |
| IPv4 ping | Yes |
| DHCP server | Yes |
| DHCP client | Yes |
| AP mode | Yes |
| eWeb login with the username and password | Yes |
| Log upload | No |
| Internet access mode | Static IP address |
| Local upgrade | Yes |
| Online upgrade | Yes |
| Configuration backup | Yes |
| Restoring factory defaults | Yes |
| Connected AP portal server | No |
| WPA-Enterprise WPA2-Enterprise WPA/WPA2-Enterprise | No |
| Smart DNS proxy | No |
| Avoiding IP address conflicts on WAN interfaces | Yes |
| Device | 1 |
| Screw | 2 x Cross pan head screw (ST4.2 x 20 mm) |
| User Manual | 1 |
Interfaces & performance
| Ethernet cable type | CAT5 |
|---|---|
| Total number of optical ports | 1 |
| Number of default WAN ports | 1 |
| Number of default LAN/WAN ports | No |
| Number of default LAN ports | 3 |
| External network speed test | 90 |
| Forwarding mode | Yes |
Wireless & radio
| 2.4 GHz Wi-Fi | Wi-Fi 4 (IEEE 802.11b/g/n) |
|---|---|
| 5 GHz Wi-Fi | Wi-Fi 4 (IEEE 802.11a/n) |
| Radio design | Dual-radio |
| Coverage range | 30 ㎡ (322.92 square ft.) |
| 2.4 GHz wireless data rate | 300 Mbps |
| 5 GHz wireless data rate | 867 Mbps |
| 6 GHz wireless data rate | No |
| 2.4 GHz channel width | Auto/20/40 MHz |
| 5 GHz channel width | Auto/20/40/80 MHz |
| Receive sensitivity | 11b: –91 dBm (1 Mbps), –88 dBm (5 Mbps), –85 dBm (11 Mbps) |
| Bluetooth | No |
| Antenna | 2.4 GHz: 2 built-in omnidirectional antennas |
| Antenna gain (2.4 GHz) | 2.00 dBi |
| Antenna gain (5 GHz) | 2.00 dBi |
| Recommended number of associated wireless clients | 8 (2.4 GHz) |
| Wireless Intelligent Optimization (WIO) | Yes |
| Layer 2 roaming | Yes |
| Layer 3 roaming | No |
| AI roaming | Yes |
| 802.11k/v roaming | Yes |
| Number of blocklists and allowlists based on MAC addresses (single SSID) | No |
| Roaming sensitivity | Yes |
| Radio logs | Yes |
| Wi-Fi standard | Wi-Fi 4, Wi-Fi 5 |
Management & security
| Safety compliance | IEC 62368-1 |
|---|---|
| Certification | CE, CB |
| AP management | Yes |
| 802.1X authentication | No |
| AP portal authentication | No |
| Link authentication | Yes |
| eWeb management | Yes |
| Ruijie Reyee App management | Yes |
| Ruijie Cloud management | Yes |
| Routing mode | Yes |
| IPv4 Ruijie SMP/ESS authentication | No |
| Password authentication | No |
| SMS-based authentication | No |
| AAA authentication | No |
| IEEE 802.1Q VLAN | Yes |
| Warranty Card | 1 |
Power & environment
| Maximum transmit power (2.4 GHz) | Combined power: 24 dBm (single-stream power: 18 dBm) |
|---|---|
| Maximum transmit power (5 GHz) | Combined power: 24 dBm (single-stream power: 18 dBm) |
| Maximum transmit power (6 GHz) | No |
| Power supply | DC power adapter |
| Maximum power consumption | 12.95 W |
| Power supply to external devices | No |
| PoE power pins | No |
| IP rating | IP41 |
| Operating temperature | 0°C to 40°C (32°F to 104°F) |
| Storage temperature | –40°C to +70°C (–40°F to +158°F) |
| Operating humidity | 5% RH to 95% RH (non-condensing) |
| Storage humidity | 5% RH to 95% RH (non-condensing) |
| Surge protection | Ethernet port: ±2 kV for common mode |
| Power settings | Yes |
| Automatic adjustment of the channel, transmit power, and channel width | Yes |
| Power cord | No |
| PoE injector | No |
| Power adapter | 1 |
Physical & mounting
| Product dimensions (W x D x H) | 86 mm x 29 mm x 165 mm (3.39 in. x 1.14 in. x 6.50 in.) (excluding the mounting bracket) |
|---|---|
| Weight | 0.21 kg (0.46 lbs) (without packaging materials) |
| Dimensions of the DC connector | Outer diameter: 5.5 mm (0.22 in.) |
| Mounting options | Wall |
| Mounting bracket | 1 (77 mm x 4.2 mm x 100 mm, or 3.03 in. x 0.17 in. x 3.94 in.) |
| Rack-mount bracket | No |
No specifications match your search. Try another term or clear the search.
Product features
- Wall-mounted
- WIFI5
Plan the equipment around your site.
Equipment can be requested on its own or with installation and configuration. The quotation sets out the agreed work, equipment, exclusions and handover.
Useful details for your enquiry
- Site location, intended use and approximate quantities.
- Existing equipment, connection standards and power arrangements.
- Cable routes, mounting positions, access and preferred timing.
Model compatibility, licences, accessories and the installation scope are checked before confirmation.
Discuss this model and installationKEEP EXPLORING
More models in this category.
Explore the specifications of other models in the same category to find the right fit for your project.
Build the wider system.
Explore equipment categories for your project. Standards, power and mounting requirements still need to be checked for the installation.